18
ECO DECT: reducing the transmission power and power consumption
Gigaset S675 IP / ALGERIAN eng / A31008-M1915-A751-1-3T19 / starting.fm / 27.10.08
Ve
rsion 4, 16.09.2005
Belt clip and headset
By using a belt clip and headset (optional)
you can easily make your handset a con-
stant companion both inside the building
and in its immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt
clip on both sides of the handset at the top
and at the same height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
Connection socket for headset
You can connect various headset types
(with 2.5 mm jack connector), including
HAMA Plantronics M40, MX100 and
MX150.
A compatibility list of tested headsets is
available on the Internet at:
www.plantronics.com/productfinder
ECO DECT:
reducing the transmission
power and power
consumption
The base station of your phone is an ECO
DECT base station, this means that:
u
The base station uses less power
because it is equipped with a power-
saving mains adaptor.
u
The reduction of the handset's trans-
mission power is dependent on the
handset's proximity to the base station.
u
The base station can also be switched
to eco mode. Eco mode reduces the
transmission power and power con-
sumption of the base station. This can
be set on your handset.
Activating/deactivating eco mode
Precondition:
Repeater support must be
deactivated.
v
¢
¢
Base
¢
Add. Features
Eco Mode
Select and press
§OK§
(
= on).
Eco mode enables an additional reduction
in the transmission power of the
Gigaset S67H/S68H
handset. If, with
Eco mode activated, the transmission
power of both the base station and the
handset is reduced, the
½
icon is shown
in the top line of the display.
Please note:
– Activating eco mode reduces the range of
the base station.
– Eco mode and repeater support cancel each
other out, i.e. both functions cannot be
used at the same time.
‰
