Gigaset S455 User Manual Download

Page: 22 / 58

Operating the answering machine

Gigaset S455 / USA EN / A31008-M1714-R301-3-6019 / answering_m.fm / 21.8.07

Delete old messages and repeat record-

ing if required.

Deleting announcements

Voice Mail

Announcements

Del Announce

Del Anc Only

§Yes§

Press the display key to con-

firm the prompt.

Press and

hold

(idle status).

After deletion, the corresponding pre-

recorded announcement is then used.

Selecting announcement mode

You can choose between

Ans. & Record

and

Announce Only

Voice Mail

Announcements

Set Ans. Mode

Ans. & Record

Announce Only

(

= on)

Press and

hold

(idle status).

The selected mode is saved even after the

answer machine is deactivated.
If in

Ans. & Record

mode the memory for

messages is full the selection is inter-

rupted and you will receive an instruction

to delete old messages.

Delete old messages.

The answer machine

automatically

switches back to the set mode once dele-

tion is complete, or you can reselect the

required recording mode.

Setting 'answer and record' or 'announce

only' by toggling

You can use the

Ans Mode Time

setting to

change over the announcement mode for

a specific period.

Example:

The

Ans. & Record

mode is set.

If you activate

Ans Mode Time

and set a

period (e.g. 6:00 pm to 8:00 am) the

answer machine switches to

Announce

Only

mode for this period. Outside this

period (8:01 am to 5:59 pm), the

Ans. &

Record

is active.

Voice Mail

Announcements

Set Ans. Mode

Ans Mode Time

( = on)

Change multiple line input:

From:

Enter hours/minutes for the start of the

period in 4-digit format/

24 hrs mode

Until:

Enter hours/minutes for the start of the

period in 4-digit format/

24 hrs mode

Activation:

Select

Off

Save changes with

§Save§

If the memory for messages is full and

Activation: On

has been selected, saving

is interrupted and you will receive an

instruction to delete old messages.

Delete old messages and repeat the set-

ting.

As soon as you change the announcement

mode (page 19), the function

Ans Mode

Time

is automatically deactivated.

Playing back messages

The date and time of each message is

logged (provided this has been set,

page 9) and displayed during the play-

back. If Caller ID is activated, then the

caller's number or name is displayed. If the

caller's number is stored in the directory,

the respective name is displayed.

Playing back new messages

New messages that have not yet been

heard are indicated by the

icon in the

display and by the

key flashing on the

handset.

Press the message key.

Ans M.:

Select and press

§OK§

An announcement informs you if there are

new messages or just old ones or no mes-

sages.
If there are new messages playback then

begins with the first new message. After

the last new message you will hear the

‰

Summary of Contents for S455



























































Search results

Summary of Contents for S455

Reviews:

Related manuals for S455

Brands by name

Popular brands

Gigaset S455, User Manual

Search results

Summary of Contents for S455

Reviews:

Related manuals for S455

Brands by name

Popular brands