Preparing
16
Grep-eng.fm
26.10.2012
Gig Repeater, IM: A31008-M601-R101-9-SU19
Repeating registration
You can reregister the Gigaset Repeater at any time, for example if initial registration was unsuccessful, or
if the Gigaset Repeater is to be registered at another base station for the first time.
Before registering the Gigaset Repeater once again (e.g. at a different base station), please reset the Gigaset
Repeater beforehand as described below:
u
$
Switch on the unit (power plug inserted)
u
$
Press the registration button for 10 seconds to reset
The Gigaset Repeater is now ready to be registered again as described above. This is signalled by a double
flashing LED once the power plug is reconnected.
Ensure that other base stations close to the Gigaset Repeater are not in registration mode during
this process.
The left LED on the Gigaset Repeater flashes continually. Af-
ter a short while the LED stays on permanently indicating
that registration is complete and that the unit is ready for
operation.
The Gigaset Repeater can be registered independently of the length of an audible registra-
tion tone or a display at the base station.
If registration is not successful, the LED on the Gigaset Repeater will flash continuously. In
this case, repeat the procedure.
