16
Grep-eng_2-0.fm
14.3.17
Gigaset Repeater 2.0, IM: A31008-N602-R101-3-SU19
When looking for a suitable installation site, a useful guide is a handset which requires a good connection
with the base station at the Gigaset Repeater installation site.
¤
To operate a handset for the first
time in the extended Gigaset
Repeater area, switch off the
handset within the new reception
range of the Gigaset Repeater, but
outside the reception range of the
base station, and then switch it
back on again.
Operation
LED display of functions
Left LED: display registration and operation function
Right LED: displays the handset traffic via the repeater
Reset repeater
If registration was not successful or re-registration has to be carried out for another reason, you can reset
the repeater as follows.
¤
Press repeater button (left LED flashes slowly).
¤
Release repeater button once the left LED flashes quickly (after approximately 10 seconds).
The repeater is ready for registration once again.
If you are using more than one Gigaset Repeater in the area of your base station, you must keep
the Gigaset Repeaters at least 10 m apart.
In operation
Light off
power supply off
Constantly on
normal link to base station
Flashing
no link to base station
Not yet
registered
Flashing twice per
second
ready for automatic registration
Light off
automatic registration unsuccessful after 5 mins
In operation
Light off
no traffic
Flashing once every 3
seconds
one handset linked via repeater
Flashing twice every 3
seconds
two handset linked via repeater
Constantly on
base station not prepared for operation with a repeater
(does not apply to base stations where
Repeater Mode
can be
switched off and on)
Base station
Extended
reception
