Gigaset R700H PRO Manual Download Page 40

Page: 40 / 69

mplat

odu

, V

ion 2.

.08.

mpl

te Basiseinstellu

ngen:

rsio

n 3.

.20

Protection against unwanted calls

Gigaset R700H / LHSG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / applications_1_HX_PRO.fm / 1/26/21

Availability and operation of the functions

may differ on your telephone.

Setting the protection mode

Disable the ringtone (do not disturb)

You can use the

Do Not Disturb

function to prevent the handset signalling an incoming call.

•

The idle display shows

"Do not disturb" active

•

Incoming calls are not signalled but show up in the call list as missed calls.

•

Most messages are blocked. Exceptions: Appointments, alarm clock and anniversaries.

. . . use

to select

Settings

Telephony

Black List

Edit

Protection Mode

. . . use

to select desired protection

No Protection

All calls are indicated, including from callers whose numbers are on
the black list.

Silent Call

The telephone will not ring and the incoming call will only appear in
the display.

Block Call

The telephone will not ring and the incoming call will not appear in
the display. The caller will hear the busy tone.

Save settings:

Save

. . . Use

to select

Audio Settings

Do Not Disturb

Edit

(

= enabled)

An incoming call occupies a line even if it is not signalled. If all the lines on the base are
occupied, calls cannot be made.

If a call arrives while you are using the phone, the handset can return to idle mode
(depends on the base).

Summary of Contents for R700H PRO






































































Search results

Summary of Contents for R700H PRO

Reviews:

Related manuals for R700H PRO

Brands by name

Popular brands

Gigaset R700H PRO, Manual

Search results

Summary of Contents for R700H PRO

Reviews:

Related manuals for R700H PRO

Brands by name

Popular brands