Field
Description
is used, or, if none is specified, the subject name of the certific-
ate is used.
Note: If you use certificates for authentication and your certific-
ate contains alternative subject names (see
on
page 41), you must make sure your device selects the first al-
ternative subject name by default. Make sure you and your
peer both use the same name, i.e. that your local ID and the
peer ID your partner configures for you are identical.
Preshared Key
Enter the password agreed with the peer.
The maximum length of the entry is 50 characters. All charac-
ters are possible except for
+
at the start of the entry.
Fields in the menu Interface Routes
Field
Description
IP Address Assign-
ment
Select the configuration mode of the interface.
Possible values:
•
3
(default value): Enter a static IP address.
•
? $"
: Can only be selected for
IKEv1. Select this option if your gateway receives an IP ad-
dress from the server as IPSec client.
•
? $" 34
: Select this option if your gate-
way assigns an IP address as server for connecting clients.
This is taken from the selected IP Assignment Pool.
Config Mode
Only where IP Address Assignment =
? $"
34
or
? $"
Possible values:
•
6
(default value): The client requests the IP address and
the gateway answers the request.
•
6!
: The gateway suggests an IP address to the client and
the client must either accept or reject this.
This value must be identical for both sides of the tunnel.
IP Assignment Pool
Only if IP Address Assignment =
? $"
34
Gigaset Communications GmbH
13 VPN
hybird 120 Gigaset Edition
255
