24
Operation
Once you have set up your baby monitor, you will be able to hear the sounds in your baby´s
room through the parent unit. You will also be able to see those sounds as the sound sensor
lights on the parent unit, which rise and fall with the volume level.
If the connection between the parent unit and baby unit is broken at any time the green “Link“
light on the parent unit will flash and you will hear short beeps. To re-establish the “Link“,
follow the directions in the “Troubleshooting“ chapter.
Note
Powering on/off the baby monitor
After having connected the baby monitor you will have to switch on both units.
Press and hold down the
On/Off key
on each unit.
To switch off the unit press and hold down the
On/Off key
again.
Parent Unit
• Long press
On/Off key
2 sec to turn on unit. Power LED will turn On in Green and then
flashing in 0.5s on and 0.5s off during linking. Antenna Icon is turned off.
• It becomes steady Green when linked.
Antenna Icon
is turned on.
• It becomes flashing Green Flashing if linking failed. Antenna Icon is turned off.
Baby Unit
• Long press
On/Off key
2 sec to turn on unit. Power LED will turn On in Green and then
flashing in 0.5s on and 0.5s off during linking.
• It becomes steady Green when linked.
• It becomes flashing Green Flashing if linking failed.
en
