2
In order to use this IP telephone with your telephone system you will need a sound
broadband connection.
Please change the admin password after installation.
The basic prerequisite for the use of the DECT solution with the telephone system
(autoprovisioning) is an existing firmware version of at least 240. If you have a
DECT base station with an older firmware, it would need to be updated manually.
New devices purchased via NFON, are always equipped with the current firmware
and do not have to be updated. You can check the current firmware version of your
DECT base station by selecting "Basic settings" in the menu of the handset and
then "Software version".
You can make 4 parallel calls per base station.
You can register up to 6 handsets (R650H, S650H, SL750H) on one base station.
The default language of the handsets is English. In order to change the language to
German, follow the next steps. Click on menu > settings > language > Deutsch.
2. Installation
2.1. Overview
Before you begin using your new Gigaset DECT system, we would like to provide you with a brief
overview of the steps required for installation.
Add the DECT base station (N510 IP PRO) and DECT handsets (R650H, S650H, SL750H) to
1.
the administration portal. You can add up to 6 handsets.
Add an extension for the DECT handset on the administration portal and assign the respective
2.
handset (R650H, S650H, SL750H) zuweisen.
Register the handsets on the base station.
3.
You can find a detailed description of the individual steps in the
2.2. Registering mobile handsets to the DECT base
You need to register the handset on the base station. You can do this via the handset menu.
Press the key on the front side of the DECT base station for ca. 5 seconds.
1.
Press the Register key on the handset. The handset now scans for the DECT base.
2.
As the final step, please enter the required access code 0000.
3.
Your DECT handset is now registered to the base station.