Gigaset N210 PRO Manual Download Page 10

Page: 10 / 81

mplat

odu

, V

ion 2.

.08.

mpl

te Basiseinstellu

ngen:

rsio

n 3.

.20

Handset

Gigaset N210 PRO / LUG International en / A31008-XXXXX-XXXX-X-XXXX / starting_N210-PRO.fm / 8/1/22

Setting the date and time

Set the date/time so that the correct date and time can be assigned to incoming calls and to
enable the alarm to be used.

The active input position flashes.

Change input position:

To switch between the entry fields:

Enter date:

enter the day, month and year in 8-digit format.

Enter time:

enter hours and minutes in 4-digit format.

Save settings:

Press the display key

Save

. . . .

Saved

is shown in the display and

a confirmation tone sounds.

Return to idle status:

Press and

hold

the End call key

The telephone is now ready for use.

Press the display key

Set Time

or, if the date and time have already been set:

Settings

OK Date/Time

Set

Calls

Date/Time

Date:

15.08.2022

Time:

00:00

Back

Save

Summary of Contents for N210 PRO


















































































Search results

Summary of Contents for N210 PRO

Reviews:

Related manuals for N210 PRO

Brands by name

Popular brands

Gigaset N210 PRO, Manual

Search results

Summary of Contents for N210 PRO

Reviews:

Related manuals for N210 PRO

Brands by name

Popular brands