Gigaset N 70 Series, Faq

Page: 3 / 3

Programming mode
Progr.
option Role IP Description LED
1 LED
2 activate by
0 Programming mode off off press & hold key for
around 10 seconds.
(LED's turn off)
The device will show direct the role Base station when entering the programming mode.
1
Base
station
DHCP Set role to Base (default). Green press & hold key for 5
seconds
With one key press you switch to the next option. (All in one)
2
Base
station
Manager
Integrat
or
DHCP
IP address obtained
automatically Set role to Base + DECT M Integrator. Blue Blue press & hold key for 5
seconds
With one key press you switch to the next option. (All in one)
3
Base
station
Manager
Integrat
or
Static IP: 192.168.143.1
Subnet mask: 255.255.0.0
Set role to Base + DECT M Integrator and apply
static IP address. Blue press & hold key for 5
seconds
With one key press you switch to the next option.
4
Base
station
Manage
r
DHCP Set role to Base + DECT Manager Blue Green press & hold key for 5
seconds
With one key press you switch back to the beginning, the Base station role
Important
The role "embedded integrator" can only be selected via the WebGui.
Change role of device to Integrator only see:
FAQ Nx70 - Reboot and Reset to factory default
Important
After the above procedure, the device will be factory default and all of your settings will be removed.