10
Gigaset L410 / en-USA / A31008-M2240-R301-2-UL19 / archimedes_en.fm / 14.03.2012
V
e
rsion
1, 1
4
.03.20
12
Operating the device
Searching for the device
¤
Select the Gigaset L410 from the list of registered handsets and call it internally
or
¤
Use your base’s paging function.
Deregistering the device from the base
Using your telephone’s handset
¤
Carry out the standard deregistration procedure for handsets, as described in
the operating instructions for the handset.
Deregistering the device from the base and restoring factory
settings
¤
Switch off the device (
¤
Press the Answer/End call key and one of the volume keys (
or
)
simultaneously for at least 3 seconds.
In this case, the device remains in the list of handsets registered to the base
until it is also deregistered there.
Switching on
¤
Press the Answer/End call key for at least 3 seconds until
you hear the start-up melody.
Note:
When you place a device that is switched off into the
charging cradle, it switches on automatically after a maximum of
1 minute.
Switching off
¤
Press the Answer/End call key for at least 3 seconds until
you hear the shut-down melody.
Note
Following deregistration, the device automatically switches to registration
mode.
> 3
