Gigaset Gigaset SX761 dsl Manual Download

Page: 12 / 118

First steps

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / device_761.fm / 06.10.2008

Schabl

one 2

005_0

7_2

First steps

System requirements

You require the following components to operate your Gigaset SX761 dsl:

A PC with an

Ethernet

port (10Base-T or 100Base-TX).

A Web browser such as Microsoft Internet Explorer V 6.0 or higher or Mozilla Firefox

V 1.0 or higher for configuring your Gigaset SX761 dsl.

To access the Internet you require
– a DSL port (splitter),
– the access data for your

Internet service provider

For Internet telephony you also require
– the access data for your VoIP service provider and
– a phone for connecting to the Gigaset SX761 dsl or a PC with a SIP client or a VoIP

telephone.

Trademarks

Gigaset Communications GmbH is a trademark licensee of Siemens AG.
Microsoft, Windows 98/SE, Windows ME, Windows 2000, Windows XP, Windows Vista

and Internet Explorer are registered trademarks of the Microsoft Corporation.
Mozilla Firefox is a registered trademark of the Mozilla Organisation.

Note:

We recommend you use the Gigaset SX761 dsl with the Windows Vista or Windows

XP operating system because only then are all system requirements for using the

device fulfilled.

Note:

For the sake of clarity, the devices are depicted in lighter shades.

Colors and details of your device may differ from those in the illustrations.

For experienced users

The default settings for the Gigaset SX761 dsl are:

– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands