Gigaset Gigaset SX100 isdn Instructions Manual Download Page 73

Page: 73 / 185

SMS (text messages)

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / sms.fm / 26.08.2003

Installing a new ringer tone or a logo

Prerequisite:

You have opened the incoming message list (page 66).

If you don't like the melody/logo, press

after

Install

. The installation is cancelled.

Activating/deactivating a logo

Scroll to the desired text message as necessary.

Read textmessage

Confirm. You can see in the title or icons that data for

installing the melodies/logos you have chosen has

been sent. You will hear the new melody or see a

preview of the logo.

If you like the melody/logo:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Install

Press the display key to initiate the installation.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Yes

Press the display key to install the new melody or

logo.

For a new melody: chose the number of the old

ringer melody you want to replace with the new

melody. You will hear the old ringer melody to be

sure it is the one you want.
Confirm.

◆

After installation, the melodies and logos will remain in the SMS

incoming message list until you delete the SMS (page 67).

◆

Other handsets registered to the same base can also have the melody

or logo installed.

◆

For more information about opening a logo or melody contained as

an attachment in an SMS, see page 72.

Open the menu.

Settings

Select the menu item and confirm.

Screen Picture

Select and confirm to activate or deactivate the logo

(

‰

= activated).

Hold

down (return to idle status).

The logo is not displayed:

◆

during a call,

◆

if the room monitor or Walk and Talk mode is activated,

◆

if you just received an SMS or a message on the answering machine

(on the SX150isdn),

◆

or when the handset has been deregistered.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands