Gigaset Gigaset SX100 isdn Instructions Manual Download Page 136

Page: 136 / 185

135

Registering/de-registering further handsets

Gigaset SX100isdn / englisch / A31008-X150-B102-1-7619 / registering_hs.fm / 26.08.2003

2. On the handset (within 30 seconds)

The handset returns to idle status after registration is complete. The internal number of

the handset appears in the display.

Manual registration:

Gigaset handsets starting with Gigaset 1000 and other GAP-capable

handsets

The following describes how to register handsets of the Gigaset families, the handsets

A 2, C 1, C 2 or handsets of other GAP-capable devices.

If the internal numbers

Int.11

Int.16

on your telephone have already been assigned,

please de-register another handset which is no longer needed before registering

(page 136).

1. On the handset

Start to register the handset as described in its operating instructions.

2. On the base

The handset is automatically assigned the lowest unassigned internal number from the

number range

Int.11

Int.16

Open the menu.

Settings

Select the menu item and confirm.

Register H/Set

Select the menu item and confirm.

Base 1

Select base (1–4) and confirm, e.g.

Base 1

Enter the system PIN of the base (Factory default:

0000) and confirm. In the display are

Regstr.Procedure

and the name of the base (e.g.,

Base 1)

If the handset has found the base, the list of available

internal numbers is shown in the display.

Int.11

Select and confirm the internal number, e.g.,

Int.11

The handset cancels the base search after 60 seconds. If registration has

not completed within this time period, repeat the process.

GAP

eneric

ccess

rofile = European standard for the interaction of handsets and

bases of other manufacturers.

Press the Registration/Paging key on the base for

approximately 3 seconds. Registration is initiated.

Summary of Contents for Gigaset SX100 isdn


























































































































































































Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands

Gigaset Gigaset SX100 isdn, Instructions Manual

Search results

Summary of Contents for Gigaset SX100 isdn

Reviews:

Related manuals for Gigaset SX100 isdn

Brands by name

Popular brands