
29
Configuring the local network
Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003
Selecting computer names and workgroup
Now you have to specify a name for the PC and assign it to a workgroup.
◆
Enter the name the PC is to appear under in the network. This name must be unique
within the network. You can complete the
Computer description
box or leave it
empty. Then click on
next
.
◆
Enter a name for the workgroup the computer is to belong to. This name must be
identical for all the PCs in the network. Continue with
next
.
Checking the network settings and completing the installation procedure
You will now see a screen in which you can check the settings you have made and make
any changes you want.
◆
Click on
Back
if you want to make any changes or click on
next
, if you want to leave
them unchanged.
If you do not want to install any more PCs:
◆
Select
Only finish the wizard, as it is not run on other computers
and confirm
twice with
next
.
◆
Answer the prompt
Do you want to restart your computer now?
with
Yes
.
If you want to set up a network on other PCs with Windows XP, you can now create a
network installation disk.
◆
Select
Create a network installation disk
and click on
next
.
◆
Follow the screen instructions and insert a disk. The necessary data will now be
copied. Now label the disk as
Network installation
.
◆
Confirm the next two screens with
next
and complete the installation procedure by
rebooting the PC.
After this your "home network" will have been installed.
To set up the network on the other PCs with the same settings, insert the disk in the
drive and run
Netsetup
with a double click.