11
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Sc
hablone 2
004_
12_2
7
Installing the device drivers
After restarting, installation is continued automatically. You are prompted to connect
the Gigaset M34 USB PC adapter to the PC and the driver software is then installed.
Later, you should register the Gigaset M34 USB PC adapter on your base station and you
can then use the full range of functions of the software.
ì
Connect the Gigaset M34 USB to a free USB port on your PC.
ì
When you connect the Gigaset M34 USB,
hardware recognition
is started. This
feature monitors the installation of new device drivers. Depending on the previous
configuration of your PC, it may be necessary to install several drivers for you
Gigaset M34 USB PC adapter. Hardware recognition is started automatically for each
driver installation.
– Follow the
hardware recognition
instructions.
– On Windows XP, confirm the preset options with
Continue
and then click on
Finish
.
If you cancel hardware recognition, the driver software cannot be correctly
installed.
ì
Wait until the hardware recognition procedure has completed installation of the
device drivers and you see a message to that effect. Once this message is displayed,
click on
Continue
in the Setup Wizard.
ì
Click on
Finish
in the Setup Wizard.
ì
Reboot your PC if you are prompted to do so.
ì
A message will be displayed, informing you that the standard device settings for
recording and playback have been changed (see also section "Audio settings" on
page 13). Click on
OK
to complete the installation.
