Gigaset DA610 / en / A30350-M212-A601-1-UZ19 / telephony.fm / 23.04.2012
10
en
fr fa ar
1110-01
Changing the VIP ringer volume
K 5 *
Activate setting mode for the VIP ringer volume. If you lift
the handset, you will hear the VIP ringer at the currently
set volume.
D
/
E
Increase or decrease the volume for the ringer.
or
Q
...
4
Select the desired value using the number keys.
K
Press the set key or
[
to save your settings and exit the
setting mode.
Changing the VIP ring tone
K M *
Activate setting mode for the VIP ring tone. If you lift the
handset, you will hear the currently set VIP ring tone.
Q
...
O
Select the required ring tone.
K
Press the set key or
[
to save your settings and exit the
setting mode.
Switching the ringer off
If you do not wish to be disturbed, you can switch off the ringer. The fol-
lowing three settings are available: all tones off, VIP only on, all tones on.
*
Hold down
the key to switch all ring tones off.
or
K * K
Press the key sequence to switch the ringer off for normal
callers but leave it on for VIP contacts.
Pressing the key sequence again will switch off the ringer
for all callers.
Once the ring tone has been switched off, the
x
symbol appears in the
display.
Switching the ringer back on
*
Hold down
the key to switch all ring tones on.
Security settings
Locking the telephone
You can secure your telephone against unauthorised access by using the
key lock. When the key lock is activated, all keys are locked, with the
exception of the
#
key and the stored emergency number (see
below).
Activating the key lock
#
When the telephone is on standby, press and
hold down
the lock key.
Once the key lock has been switched on, the
i
symbol and the
KEYS
LOCKED
message appear in the display. If the handset is lifted, the key
lock is indicated by
.
Deactivating the key lock
#
Hold down
the lock key.
Emergency calls
There are two emergency numbers stored in the telephone by default
(110, 112). You can store an additional emergency number with up to 32
digits. These emergency numbers can also be selected when the key
lock is switched on.
Selecting an emergency number with activated key lock
c
Lift the handset.
is displayed.
~
Enter the emergency number.
Saving the emergency number
K N 3
Activate setting mode for the emergency number. If an
emergency number is already set, it is displayed.
Hold
down
the
u
key to clear the number.
Q
...
O
/
*
/
#
/
H
/
I
Enter the emergency number.
K
Press the set key or
[
to save your settings and exit the
setting mode.
Direct calling (baby call)
When direct calling is activated, the stored number (max. 32 digits) is
dialled by pressing any key (except for the key sequence
K N 2
).
Activating direct calling
K N 2
Activate setting mode for direct calling.
Q
...
O
/
*
/
#
/
H
/
I
Enter the direct calling number.
K
Press the set key or
[
to activate direct calling and exit
the setting mode.
Deactivating direct calling
K N 2
Activate setting mode for direct calling.
X
Hold down
the
u
key to clear the direct call number.
K
Press the set key or
[
to deactivate direct calling and exit
the setting mode.
Blocking numbers
You can block phone calls to specific dialling codes (e.g. chargeable
codes), max. 3 numbers with 5 digits each.
K 2
Activate setting mode for blocking numbers. If a dialling
code is already set, it is displayed.
Hold down
the
u
key
to clear the entry.
Q
...
O
Enter the dialling code to be blocked (max. 5 digits).
To edit the next dialling code:
v
Confirm with
[
and continue.
To save the settings:
K
Save your settings and exit the setting mode.
Note:
The names of persons, whose numbers are stored in the phone-
book with the area code defined here, are no longer displayed. Change
the appropriate phonebook entries, where necessary.
