Gigaset E560A Manual Download

Page: 31 / 70

Gigaset E560A / LUG US en / A31008-M2728-R301-1-7619 / SOS_function.fm / 1/21/19

mplat

odu

, V

n 1.

201

Emergency function

fr es

Recording/changing a personal emergency message

Menu

Settings

Emergency Function

Emergency

Announce.

Select the corresponding function

Record Announce.

Confirm by pressing

, if you would like to record a message (e. g. name and address),

which will automatically be announced after the participant being called presses the
emergency key. The announcement is played back for you to check. You can re-record the
announcement, if necessary.

Play Announce.

You can hear the standard announcement, or, if you have recorded an announcement, the
additional personal emergency message.

Delete Announce.

The additional personal announcement is deleted. Only the standard announcement is used.

Activating/deactivating the emergency function

Menu

Settings

Emergency Function

Emerg. Call Mode

(

= on) . . . the key

is illuminated

Triggering an emergency call

Press the direct dial key

on the handset or the base, the emergency call commences.

Please note that if the emergency function is activated, the standby time of the
handset will reduce.

At least one emergency number has been saved (

page 28) and the emergency

function is activated (the key

is illuminated)

(

page 29).

An emergency call interrupts all active calls on the base.

If you have

accidentally triggered an emergency call

, end it by pressing the End call

key .

The emergency numbers saved apply to both the Gigaset E560H handsets as well as
the base.

The emergency key also works when the keypad lock is activated.

Summary of Contents for E560A







































































Search results

Summary of Contents for E560A

Reviews:

Related manuals for E560A

Brands by name

Popular brands

Gigaset E560A, Manual

Search results

Summary of Contents for E560A

Reviews:

Related manuals for E560A

Brands by name

Popular brands