Gigaset E560 A User Manual Download

Page: 9 / 64

Gigaset E560A / LUG GBR en / A31008-M2708-L101-1-7619 / starting.fm / 7/14/16

mplat

, V

ion 1

, 01.

014

/ M

odu

leV

ion 1

Connecting the base

Getting started

Contents of the package

•

One Gigaset E560A base

•

One Gigaset handset

•

Two batteries

•

One battery cover

•

One power adapter for the base

•

One phone cord

•

One user guide

•

one plastic cover for the tab

If you have purchased a

model with multiple handsets

, the package should contain the follow-

ing for each additional handset:

•

two batteries

•

one battery cover

•

one charging cradle

•

one power adapter

Connecting the base

The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.

The device's feet do not usually leave any marks on surfaces. However, due to the mul-
titude of different varnishes and polishes used on furniture, contact marks on the sur-
faces cannot be completely ruled out.

Never expose the telephone to heat sources, direct sunlight or other electrical
devices.

Protect your telephone from moisture, dust, corrosive liquids and vapours.

First

, connect the telephone jack

and insert the cables into the cable
ducts.

Then

connect the power adapter

The answer machine is ready for use

approx. 15 seconds after

the base has been con-

nected or reset.

Summary of Contents for E560 A

































































Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands

Gigaset E560 A, User Manual

Search results

Summary of Contents for E560 A

Reviews:

Related manuals for E560 A

Brands by name

Popular brands