5
Description of new and updated functions
Gigaset DL500A / en / A31008-xxxx-xxxx-x-xxxx / Rel3_Saturn.fm / 30.11.2011
V
e
rsion 4.1, 21
.11.2007
Door Disconnect Code:
Insert a DTMF code for ending the call and disconnecting the audio channel.
¤
Press the
§Save§
display key to save the settings.
Doorline calls
Prerequisite:
Incoming and outgoing doorline calls are only possible if FXS Port is
set to
Doorline
mode.
Call from doorline
The call from the doorline device can be started either to all internal subscribers
(collective call) or to a selected internal subscriber.
If the doorline device initiates a call to an internal subscriber, which is not reachable,
the doorline device stays in busy state.
If the doorline device initiates a call to an internal subscriber, which is in the call
state, the internal call waiting from doorline is presented.
The incoming doorline call is signalled on the base station/handset.
¤
Pick up the receiver or press the handsfree key
d
to send the
Door Connect
Code
to the doorline device. You can talk to the caller.
In this state any internal or external call waiting is signalled to the base station/
handset. You cannot accept or react to it.
¤
Press the
§Open Door§
display key to open the door.
The
Door Open Code
is sent to the doorline device. The door is opened.
¤
Put the receiver on hook/press the red end key
T
to close the connection.
The
Door Disconnect Code
is sent to the doorline device.
Call to doorline
To call the doorline proceed as follows:
¤
Press the
u
control key.
The phone tries to initiate an internal call.
¤
Select
INT 8
for the doorline device.
¤
Pick up the receiver or press the handsfree key
d
.
If the doorline device is available, you are connected with the doorline.
¤
Press the
§Open Door§
display key to open the door.
The
Door Open Code
is sent to the doorline device. The door is opened.
If the doorline device is busy:
¤
Press the red end key
T
to return to idle state.
Please note
Incoming doorline calls are signalled as regular internal calls from internal sub-
scribers. The internal name of the FXS port
INT 8
is displayed.
Please note
u
The doorline device accepts calls automatically.
u
If the receiver is on hook the handsfree mode is automatically switched on.
