38
Making calls using network services
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
V
e
rsion 4, 16.0
9
.2005
Internal call divert
You can divert all external calls intended for
a desktop phone receive connection to a
handset or device connected to the FAX
port.
v
¢
Ç
Select Services
¢
Call Divert
Internal
Select and press
§OK§
.
¤
You can enter data in the following fields:
Status
Activate/deactivate call divert.
To handset
Select internal party.
Ring delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay, (
None
,
10 sec.
,
20 sec.
or
30 sec.
).
If you select
None
, the call is not signalled
on the desktop phone and is diverted
immediately.
§Save§
Press the display key.
Internal call divert is only single-stage i.e., if
the calls are diverted to a handset that also
has call divert activated, this call divert is not
activated.
Activating/deactivating call
waiting for external calls
If the function is activated, during an
exter-
nal
call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display. The
caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call, you are the only party
assigned to this connection and this connec-
tion is not assigned to an answering
machine.
Activating/deactivating call waiting
v
¢
Ç
Select Services
¢
Call Waiting
Status
Activate/deactivate.
¤
Press the display key
§Save§
.
Transferring a call – activating/
deactivating ECT (Explicit Call
Transfer) (ISDN)
When call swapping, you can connect two
external call participants
to
each other by simply replacing the receiver.
The transfer of the call by replacing the
receiver is not supported by all ISDN
exchanges and PABXs.
You can activate/deactivate this function for
calls via your desktop phone.
v
¢
Ç
Select Services
Transfer (ECT)
Select and press
§OK§
(
³
= on).
Setting up a busy signal for when
the MSN is being used (Busy on
Busy)
This setting allows callers to get a busy tone
immediately when an external call is already
being made on the MSN called, regardless
of the setting
Call Waiting
.
Call waiting will not be signalled.
v
¢
Ç
Select Services
Busy on Busy
Select and press
§OK§
(
³
= on).
Please note
Diverting calls to your phone numbers
can result in additional costs. Please con-
sult your provider.
