Gigaset DL500a Manual Download

Page: 52 / 137

Sending SMS (text messages)

Gigaset DL500A / GRC EN / A31008-N3103-T101-2-7619 / sms_BRD_neutral.fm / 20.01.11

rsion 4, 16.0

.2005

Receiving an SMS

All received SMS messages are saved in the
incoming list. Linked SMS messages are dis-
played as

one

message. If this is too long or

is not transferred completely, it is split into
individual messages. Since an SMS remains
in the list even after it has been read,

regu-

larly delete SMS messages from the list

The display tells you if the SMS memory is
full.

Delete SMS messages you no longer
require

(

page 50)

Incoming SMS list

The incoming list contains:

SMS messages that could not be sent due
to an error.

New SMS messages are indicated by the

icon in the display, the

message key

flashing and an advisory tone sounding.

Opening the incoming list with
the

key

Press.

The incoming list displays the number of
entries (example):

Bold:

New entries

Normal font:

Old entries

Open list with

§OK§

Every entry in the list contains:

The number or name of the sender

The receive connection to which the SMS
is addressed

The date of receipt

Example:

Opening the incoming list via the SMS
menu

Messaging

SMS

Incoming

Deleting the incoming list

All

new and old

SMS messages in the list are

deleted.

Open the incoming list.

§Options§

Open menu.

Delete List

Select, press

§OK§

and confirm

with

§Yes§

. The list is deleted.

Reading or deleting SMS messages

Open the incoming list, then:

Select SMS.

§Read§

Press the display key. The text is
displayed. Scroll line by line
using

Or delete the SMS with

§Options§

Delete Entry

§OK§

After you have read a new SMS, it is given the
status "Old" (is no longer shown in bold).

Changing the character set

If you cannot see any text or symbols, the
SMS may have been written with a different
character set (Cyrillic, Greek etc.).

Read the SMS

§Options§

Press the display key.

Character Set

Select and press

§OK§

Select character set and press
the

§Select§

display key (

= on).

The text is shown in the selected character
set. The setting only applies to the current
SMS.

Please note

Each incoming SMS is signalled by a sin-
gle ring (ringer as for external calls). If
you accept the "call", the SMS is lost. To
prevent this ring, suppress the first ring
for all external calls

(

page 53)

SMS:

(2)

0123727859362922

10.10.10 09:07

Summary of Contents for DL500a










































































































































Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands

Gigaset DL500a, Manual

Search results

Summary of Contents for DL500a

Reviews:

Related manuals for DL500a

Brands by name

Popular brands