29
Functions during a call
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / during.fm / 08.10.2003
Conference call
Precondition:
You have established an enquiry call (page 26 and page 27).
There is both an active call (the one established with an enquiry call) and a held call (the
first). In a conference call you can speak to both other callers at the same time.
It is possible to conduct two conference calls at the same time on your base station.
Establishing a conference
You are making an enquiry call. The first caller is put on hold.
Press the display key
CONF.
to establish conference switching.
Ending a conference
You have several options for ending a conference call:
Forwarding an incoming call – CD (Call Deflection)
CD enables an incoming call to be diverted to any phone number while it is ringing,
without having to answer the call.
You can pre-set a divert destination (page 102), dial a phone number from the
Phonebook or enter a new number.
i
You can make a conference call with
◆
two external users or
◆
with one internal user and one external user.
either ...
You end the conference:
a
Replace the receiver (return to idle status).
or ...
You change the conference to an enquiry call:
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
INDIV.
Press the display key to change the conference
switching to an enquiry call (page 26 or
page 27).The connection that was active
immediately before the conference was established
becomes the active call again.
i
Open the menu.
s
Forward
Select the menu item and confirm.
The pre-set divert destination is dialled.
OK
