Gigaset CX203 isdn Manual Download Page 18

Page: 18 / 168

Preparing the base station for use

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / starting.fm / 08.10.2003

Example of how to assign an MSN:

You have applied for four MSN's, two for business use (MSN1, MSN2) and two for private

purposes (MSN3, MSN4). Four handsets are connected to a base station. Two handsets

(Int.11 and 12) and the answering machine AM 91 are intended for business use, and

two handsets (Int.13 and 14) and the answering machine AM 92 are intended for

private use.

Ring delay

When ring delay is active, the signal for an incoming call is delayed on the base station

(e.g. after 5 rings – the number can be set). Ring delay can be set individually for each

internal user and for each receive MSN (page 103).
As an example, an incoming call should be signalled to MSN1 Int.11 when Int.12 does

not answer the call. To do this, activate the ring delay for Int.11 and MSN1 (e.g. to 5

rings). The call is signalled directly to Int.12 , but Int.11 is signalled after the 5th ring.

Launching the Getting started wizard and setting the basic settings

You can operate the Getting started wizard for your base station either directly using the

base station or using an S1 / SL1 handset.

Launching the Getting started wizard:

Internal users

Use

Receive MSN

Send MSN

handsets

Int.11 , 12

Business

MSN1

MSN2

MSN1

Answering

machine

AM 91

MSN1

MSN2

---

Handset

Int.13

Private

MSN3

Handset

Int.14

MSN4

Answering

machine

AM 92

MSN3

MSN4

---

Open the menu.

Set base

Select the menu item and confirm.

Installation

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to launch the Getting started

wizard.
If you already have set a system PIN (not 0000)

(page 90), you will be asked to enter it.

If required, enter the system PIN and confirm.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands