Gigaset COMFORT 5 IP flex Series User Manual Download

Page: 83 / 145

Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / extending.fm / 1/14/20

mplat

, V

rsion 1, 01.

014

Repeater

Locating a handset (Paging), finding the telephone's IP address

Briefly

press the Registration/paging key on the base station.

All handsets will ring at the same time (paging), even if ringtones are
switched off.

Exception:

handsets on which the baby monitor is

activated.

The current (local)

IP address

for the base station appears in the

handset displays.

Ending the search

Briefly

press the registration/paging key on the base station

or Press the End call key

on the handset

or Press the display key

Silence

on the handset

or No action. After approx. 30 seconds, the paging call will end automatically.

Changing the handset name and internal number

When registering multiple handsets, they will automatically be assigned the names

INT 1

INT 2

etc. Each handset will automatically be assigned the lowest unassigned internal number. The
internal number is shown as the name of the handset on the display e.g.

INT 2

. You can change

the names and the numbers of handsets. The name must not exceed 10 characters in length.

. . . the list of handsets is opened, the current handset is highlighted with

. . . use

to select a handset . . . possible options:

Repeater

A repeater increases the receiving range between the Gigaset handset and the base station.

The registration procedure for a repeater depends on the version of the repeater being used.

•

Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0

•

Repeater with encryption, e.g. Gigaset repeater later than Version 2.0

Further information about the Gigaset repeater can be found in the repeater user guide and at

www.gigaset.com.

Edit name:

Options

Rename

. . . use

to delete the current

name . . . use

to enter a new name

Edit number:

Options

Edit Handset No.

. . . use

to select a

number

Save

Paging

IP: 192.168.1.2

Silence

Summary of Contents for COMFORT 5 IP flex Series


















































































































































Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands

Gigaset COMFORT 5 IP flex Series, User Manual

Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands