Gigaset COMFORT 5 IP flex Series User Manual Download

Page: 26 / 145

mplat

, V

rsion 1, 01.

014

Making calls

Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / telephony.fm / 1/14/20

Making internal calls

Press

briefly

. . . the handset list is opened, this handset is indicated by < . . . use

to select handset or

Call all

(group call) Press the Talk key

Fast access for group call:

Press

briefly

press and

hold

Internal consultation call / Internal transfer

Call an

external

participant and transfer the call to an

internal

participant or hold a consultation

call with him or her.

. . . the list of handsets is opened

. . . use

to select a handset or

Call all

. . . the internal participant(s) are called . . . possible options:

Establishing a conference call / Call swapping

Conduct a call while a second call is being held. Both callers are indicated on the display.

•

Call swapping: Use

to swap between both participants.

•

Establish a three-way conference call:

Conf.

•

End a conference call:

End Conf.

. . . You have been connected back to external participant

. . . use

to swap between both participants

The other participants end the conference call using the End call key

Multiple handsets have been registered to the base station (

p. 81).

Internal calls to other handsets registered to the same base station are free of charge.

You hear the busy tone if:

•

there is already an internal connection

•

The handset being called is not available (deactivated, outside of range).

•

The internal call is not accepted within 3 minutes.

Hold a consultation call:

Speak to the internal participant

Return to the external call:

Options

End active call

Transfer the external call when the internal participant has answered:

Announce an external call Press the End call key

Transfer the external call before the internal participant answers:

Press the End call key

. . . the external call is forwarded immediately. If the

internal participant does not answer or the line is busy, the external call will
automatically return to you.

End the internal call if the internal participant does

not

answer or the line is busy:

End

. . . You return to the external call

Summary of Contents for COMFORT 5 IP flex Series


















































































































































Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands

Gigaset COMFORT 5 IP flex Series, User Manual

Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands