Gigaset COMFORT 5 IP flex Series User Manual Download

Page: 81 / 145

Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / extending.fm / 1/14/20

mplat

, V

rsion 1, 01.

014

Multiple handsets

Expanding the functionality of the telephone

Multiple handsets

Up to six handsets can be registered to the base station.

Each registered device is assigned an internal number (1-6) and an internal name (

INT 1

–

INT 6

The number or name assigned can be changed.

If all internal numbers have already been assigned at the base station:

de-register a handset

that is no longer needed

Registering the handset

A handset can be registered on up to four base stations.

On the base station

Press and

hold

the Registration/Paging key on the base station (approx. 3 secs) . . . the

paging key flashes when the base station is in registration mode.

On the handset

. . . use

to select

Settings

Registration

Register

Handset

. . . an available base station is sought . . . Enter system PIN (default

setting:

0000

)

Once registration is complete, the handset returns to idle status. The internal number of the

handset appears in the display, e. g.

INT 1

. If not, repeat the procedure.

When a Gigaset handset is registered, the base station transfers entries for the
following online directories to the local directory on the handset to enable the online
directories to be used on the new handset as well.

•

The currently set online directory with a provider-specific name (e. g.

The Direc-

tory

•

The Gigaset.net directory with the name

Gigaset.net

Successful registration is acknowledged with the message

Data Transfer x entries

received

Registration must be initiated on the base station

and

on the handset.

Both must be carried out

within 60 secs

If the handset is already registered with four bases, select the base to be replaced by
the new base.

Summary of Contents for COMFORT 5 IP flex Series


















































































































































Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands

Gigaset COMFORT 5 IP flex Series, User Manual

Search results

Summary of Contents for COMFORT 5 IP flex Series

Reviews:

Related manuals for COMFORT 5 IP flex Series

Brands by name

Popular brands