Gigaset COMFORT 5 IP flex Series User Manual Download | Manualshive

Page: 107 / 145

background image

Gigaset E380A Care / LUG CH en / A31008-N2535-R102-1-4U19 / settings_web-conf.fm / 1/14/20

Te

mplat

e

G

o

, V

e

rsion 1, 01.

07

.2

014

Web configurator

107

Voice quality for VoIP connections

Functions to improve the voice quality on VoIP connections (IP or Gigaset.net) are available on
the web page:

¤

Settings

Telephony

Audio

The voice quality for VoIP connections is mainly determined by the

voice codec

used for

transferring the data and the available

bandwidth

of your DSL connection.

In the case of the voice codec, the voice data is digitised (coded/decoded) and compressed. A
"better" codec (better voice quality) means more data needs to be transferred, i. e. it requires a
DSL connection with a larger bandwidth. You can change the voice quality by selecting (bearing
in mind the bandwidth of your DSL connection) the voice codecs your phone is to use, and
specifying the order in which the codecs are to be suggested when a VoIP connection is
established. Default settings for the codecs used are stored in your phone; one setting optimised
for low bandwidths and one for high bandwidths. The following voice codecs are supported:

G.722

Excellent voice quality. The

broadband

voice codec

G.722

works at the same bit rate as G.711

(64 kbit/s per speech connection) but with a higher sampling rate. You can use this to play
back higher frequencies. The speech tone is therefore clearer and better than with the other
codecs (High Definition Sound Performance).

G.711 a law / G.711 μ law

Excellent voice quality (comparable with ISDN). The required bandwidth is 64 kbit/s per voice
connection.

G.726

Good voice quality (inferior to that with G.711 but better than with G.729). Your phone
supports G.726 with a transmission rate of 32 kbit/s per voice connection.

G.729

Average voice quality. The necessary bandwidth is less than or equal to 8 kbit/s per voice
connection.

To save additional bandwidth and transmission capacity on VoIP connections that use the

G.729

codec you can suppress the transmission of voice packets in pauses ("silence

suppression"). Instead of the background noises in your environment, your caller then hears
a synthetic noise generated in the receiver (option:

Enable Annex B for codec G.729

).

Network mailbox

If the provider (fixed line network and/or Internet telephony) has a network mailbox, this is
displayed on the following web page:

¤

Settings

Telephony

Network mailboxes

You can enter the phone numbers for the network mailbox here and switch the network mailbox
for the configured VoIP connections on and off.

«
...
105
106
107
108
109
...
»

Summary of Contents for COMFORT 5 IP flex Series


















































































































































Reviews:

No comments

Related manuals for COMFORT 5 IP flex Series

Brand: Yealink Pages: 4

Brand: Grandvue Pages: 14

ZuM Prestige Combo

Brand: Spracht Pages: 24

BT250 - Headset - Over-the-ear

Brand: Jabra Pages: 98

Brand: Jabra Pages: 18

Brand: ACME Pages: 40

Brand: HumanTechnik Pages: 99

Brand: Lubix Pages: 7

Brand: Jabra Pages: 2

Brand: Jabra Pages: 2

Brand: Jabra Pages: 8

Brand: Jabra Pages: 15

FreeSpeak BT250

Brand: Jabra Pages: 14

Brand: Plantronics Pages: 2

Brand: Plantronics Pages: 2

Brand: Plantronics Pages: 7

Brand: Plantronics Pages: 12

Brand: Plantronics Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands