Gigaset C810 Manual Download Page 58

Page: 58 / 71

Operation via the base

Gigaset C810/810 A / CHN en/ A31008-M2327-Y101-1-7619 / AM_BS+HS.fm / 15.09.2011

rsion 4, 16.0

.2005

Playing back messages/
memos

Message indication

If new messages/memos are available:

The

key flashes.

The number of new messages/memos is
displayed.

If the memory is full you will hear an end
tone,

Memory Full

is displayed, the record-

ing is aborted, and the call recorded up to
that point is listed in the answering machine
list as a new message.

Playing back new messages

Press the key to play back all
messages and memos.

If there are new messages, playback begins
with the first new message. After the last
new message you will hear the end tone and
an announcement.

Adjust volume during message playback:

= quieter;

= louder.

Playing back old messages

You can listen to old messages if there are no
more new messages. Begin playback as
described under "Playing back new mes-
sages".

After the entry time and date have been
played back (after approx. 3 seconds) a new
message assumes the status "old".

Stopping and controlling playback

During message playback:

Stop

playback.

Go to the start of the current
message.

Press twice

to go back

to the previous message.

Skip to next message.

Press twice

to skip to the next

but one message.

Deleting messages

During playback or pause:

§Delete§

Press the display key.

Picking up a call from the
answering machine

You can pick up a call while the answering
machine is recording or is being operated
via remote operation:

Lift the receiver or press the
speaker key

Recording stops and you can speak to the
caller.

If 2 seconds of the call have already been
recorded when you pick it up, the call will be
displayed as a new message.

Activating/deactivating call
screening

While a message is recording, you can screen
calls via the loudspeaker of the base and reg-
istered handsets.

Permanently activating/deactivating
call screening

§§Menu§§

Call Screening

Select

Call Screen On

Call

Screen Off

and press

§§Ok§§

Call screening can be simultaneously acti-
vated on the base and handset.

Memo

2011-08-17 09:30

Gigaset

Summary of Contents for C810








































































Search results

Summary of Contents for C810

Reviews:

Related manuals for C810

Brands by name

Popular brands

Gigaset C810, Manual

Search results

Summary of Contents for C810

Reviews:

Related manuals for C810

Brands by name

Popular brands