Gigaset C610H, Manual, Page: 37 / 56

35
Using a handset as a room monitor (Babyphone)
Gigaset C610H / AUS / A31008-M2355-C401-1-7619 / registr_sett.fm / 19.05.2011
V
e
rsion
4,
16.
09
.2
005
Activating the room monitor and
entering the destination number
v
¢
É
¢
Room Monitor
¤
You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External .
External number: Select the number from
the directory (press display key
ö
) or enter
it directly.
Internal number: Select display key
§Change§
¢
Select handset or Call All if you want to
call all registered handsets
¢
§OK§
.
In idle status, the destination number or the
internal destination number is displayed.
Two Way Talk:
Switch the handset's speaker on or off
(select
On or Off ).
Sensitivity:
Select the sensitivity of the sound level
(select
Low or High ).
¤
Press
§Save§
to save the settings.
When the room monitor function is activated,
the idle display looks as shown below:
Changing the set destination number
v
¢
É
¢
Room Monitor
¤
Enter and save number as described under
"Activating the room monitor and entering
the destination number" (
¢
page 35).
Cancel/deactivate room monitor
Press the end call key
a
to cancel the call
when the room monitor is activated .
In idle status press the display key
§OFF§
to deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites : The phone must support tone
dialling and the room monitor should be set for
an external destination number.
¤
Accept the call from the room monitor and
press keys
9 ;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls.
To reactivate the room monitor function with
the same phone number:
¤
Reactivate and save with
§Save§
(
¢
page 35).
Warning!
u
Always check the operation of
the room monitor before use.
For example, test its sensitivity. If you
are diverting the room monitor to an
external number, check the connec-
tion.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the charging cradle. This
ensures that the battery does not run
down.
u
Ideally position the handset 1 to
2 metres away from the baby.
The microphone must be directed
towards the baby.
u
The connection to which the room
monitor is diverted must not be blocked
by an activated answering machine.
i V
07:15
INT 1 22 Oct
Á
Room Monitor
0891234567
OFF Options