background image

58

 

Gigaset A670A (C530A) / LUG BE-NL  en / A31008-M2512-M201-1-3F19 / appendix.fm / 7/10/17

Te

mplat

e

 B

o

rn

eo

, V

e

rs

ion 1

, 21.

06

.2

012

Environment

Authorisation 

This device is intended for analogue phone lines in the Belgian and Dutch network.

Country-specific requirements have been taken into consideration.

Hereby, Gigaset Communications GmbH declares that the radio equipment type Gigaset A670A 
is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

 

www.gigaset.com/docs.

This declaration could also be available in the "International Declarations of Conformity" or 
“European Declarations of Conformity” files.

Therefore please check all of these files.

Exclusion of liability

Your handset display has a resolution of pixels. Each pixel consists of three sub-pixels (red, green, 
blue). 

It may be the case that a pixel is incorrectly controlled or has a colour deviation. 

 

This is normal and no reason for a warranty claim.

 

The following table shows the number of pixel errors that may occur without leading to a 
warranty claim. 

Environment

Our environmental mission statement 

We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a 
better world. Our ideas, technologies and actions serve people, society and the environment. 
The aim of our global activity is to secure sustainable life resources for humanity. We are com-
mitted to a responsibility for our products that comprises their entire life cycle. The environmen-
tal impact of products, including their manufacture, procurement, distribution, utilisation, ser-
vice and disposal, are already evaluated during product and process design. 

Further information on environmentally friendly products and processes is available on the 
Internet at www.gigaset.com.

Description

Maximum number of permitted pixel 
errors

Colour illuminated sub-pixels

1

Dark sub-pixels

1

Total number of coloured and dark sub-pixels

1

Signs of wear on the display and housing are excluded from the warranty.

Summary of Contents for A670A








































































Reviews: