12
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
Te
mpla
te Bali, V
e
rsion
1, 16.0
2.2012
Operating when on the move (remote operation)
You can check your answering machine from any other telephone (hotel, pay phone etc.).
Prerequisites:
◆
You have set a system PIN other than 0000 (
◆
The phone you are using for remote operation has tone dialling (DTMF) i. e., you hear different tones when you press
the keys.
Calling the answering machine and playing messages
~
(Dial your own number.)
¤
When you hear your announcement, press
9
and enter the system PIN.
The following keys are used for operation:
Activating the answering machine
~
(Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
¤
~
Enter system PIN
Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The
answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have
requested
it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
and to use fast access (
page 1), you will need to enter the number in your phone:
§Menu§
¤
q
Answer Machine
¤
§OK§
¤
q
Net Mailbox
¤
~
(enter number)
¤
§OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤
Briefly
press the registration/paging key on the base station (
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging:
Briefly
press the registration/paging key on the base station (
page 2) or press the talk key
c
or the
end call key
a
on the handset.
Registering handsets manually
You can register up to four handsets on your base station.
Each additional handset
must be registered on the base sta-
tion in order for it to work properly!
Registration takes approx. 1 minute. Once the
registration
process has been
completed successfully
, the display briefly
shows
HS registered
and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.
A
During the number/date/time announcement:
Skip to the start of the previous message.
During the message playback:
Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
1) On the handset
§Menu§
¤
q
Settings
¤
§OK§
¤
q
Handset
¤
§OK§
¤
q
Register HS
¤
Enter the base station system PIN (default set-
ting: 0000)
¤
§OK§
¤
Registering
is displayed.
2) On the base station
Within 60 seconds, press and
hold
the registration/paging key on the base station (
page 2) for approx. 3 seconds.
(A410A only: There is a tone played if the registration mode is activated.)