Gigaset A31008-M601-R101-4-SU19, Operating Instructions Manual, Page: 4 / 12

Preparing
17
Grep-eng.fm
22.12.2010
Gig Repeater, IM: A31008-M601-R101-4-SU19
EN
GLISH
Preparing
Please refer to the user guide for your phone to check whether your base station is suitable for operating
the repeater and how to prepare it for registering the repeater.
If a repeater can register at your base station, make sure repeater mode is
enabled .
Automatic registration
Carry out the following steps:
$
Gigaset Repeater is enabled (power plug inserted). The de-
vice is then in registration mode for a period of five minutes.
Place the base station in Repeater registration mode in the
same way as you would to manually register a handset.
Please refer to the operating instructions for your base sta-
tion.
Socket
for
power
lead
LED’s
Registration button
The power lead supplied is plugged into the socket on the Gigaset
Repeater’s rear side.
The different operating modes are indicated on the front of the
Repeater unit by means of two LED’s (for an explanation, see
page 19).