background image

Call charges, call duration

48

I_KAP03.FM5

Gigaset 2060isdn

Inland

8.12.98

A30853-X210-B101-1-19

t

Charge redisplay

Activate/deactivate display of charge for most recent 

call

(Call-charge display must be activated.)
If this function is activated the charge for the most recent 

call is displayed as soon as the trunk is seized for a call. 

Practical in the catering trade, for example, because the 

charge for a call placed by a guest can be checked right 

away. See “Deleting total” for instructions on resetting 

the call charge display.

t

Total

Check charge totals per multiple subscriber number 

or delete per MSN.

Use “NEXT” to browse through the individual multiple 

subscriber numbers.
The last value in the list is the grand total for the base sta-

tion.

t

Total per unit

Check charge totals per registered mobile unit

 or con-

nected device, i.e. per internal user, and 

delete

 single to-

tals.

All running totals are deleted when you re-enter 

or change the charge factor.
If you want to reactivate call-units display, enter 

0.00

” as the new charge factor.

The charge factor is progammable in the range 

9.99 to 999: the setting is valid for all users.

Summary of Contents for 2060isdn















































































































Reviews: