Gigamedia System Configuration Manual
Page 5 , Total 43
into computer port.
Plug the power adapter into an outlet to power up the device.
If you are using our 5GHz radios, most of them are using Gigabit LAN port. Thus you should
connect them with a CAT-5E or CAT-6 cable to get the maximum performance.
1.2 Local Network Settings
Set PC and set IP address as 192.168.1.x
（
x is 1-254 except 2
，
to make sure no conflict with
other IP in the network.
）
Run Web browser, input
http://192.168.1.2
（
default IP address
）
and enter.
Figure 2, default username
：
admin
, password
：
admin
(You can change this password after
entering the system) , and then click Login to the software system.
