manualshive.com logo in svg

GIGAIPC QD-7100A-SI, Quick Start Manual, Page: 10 / 46

Share
Download
GIGAIPC QD-7100A-SI Quick Start Manual Download Page 10

10

www.gigaipc.com

Chapter 3 – Board Hardware Information 

25

3.1 

Jumpers and Connectors  ............................................. 26

3.2.1  CPU FAN (CPU FAN connector)  .................................... 29
3.2.2  System FAN (System FAN connector)  .......................... 30
3.2.3  COM2, COM3, COM4 (Serial port header) ................... 31
3.2.4  FUSB (USB 2.0 header) .................................................. 32
3.2.5  SATAIII_0, SATAIII_1 (SATA 6GB/S Connector) .............. 33
3.2.6  GPIO_CNT (General Purpose input/output header ) .... 34
3.2.7  SATAPW1, SATAPW2 (SATA 6Gb/s power connector) ... 35
3.2.8  AT_CN (AT/ATX power mode select jumper) ................ 36
3.2.9  DC_IN (DC IN 1x4-pin power connector ) ..................... 37
3.2.10  SPK_OUT (Speaker out connector) ............................... 38
3.2.11  FP_Audio (Front Audio connector) ............................... 39
3.2.12  BKL_CN (Back light brightness control connector) ....... 40
3.2.13  SYS_PANEL (Front panel header) ...................................41
3.2.14  LVDS (LVDS connector) .................................................. 42
3.2.15  LSW (LVDS resolution jumper) ...................................... 43
3.2.16  BATTERY (Battery cable connector) .............................. 44
3.2.17  JCOM1 (COM1 RI# pin RI#/5V/12V Select) .................... 45

Summary of Contents for QD-7100A-SI















































Reviews:

No comments