GIGAIPC QBiX2-Pro-APLB4200H-A1, Quick Start Manual

Page: 63 / 73

63 www.gigaipc.com
Sys
tem - QBiX
-Pr
o Series
QBiX2-Pr
o-APLB4200H-A1 (QD-4200A
-SI)
4.2.6 SATA Configuration
»
SATA Mode Selection
AHCI Configures the SATA controllers to AHCI mode. Advanced Host
Controller Interface (AHCI) is an interface specification that allows the
storage driver to enable advanced Serial ATA features such as Native
Command Queuing and hot plug.
»
M.2 Port
The category identifies M.2 types of hard disk that are installed in the
computer. System will automatically detect HDD type.
Note that the specifications of your drive must match with the drive
table. The hard disk will not work properly if you enter improper
information for this category.
Hard drive information should be labeled on the outside device casing.
Enter the appropriate option based on this information.