GIGAIPC QBiX-Pro-KBLB7100H-A1, Quick Start Manual

Page: 56 / 72

56 www.gigaipc.com
4.2.3 SATA Configuration
»
SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Intel
Chipset or configures the SATA controllers to AHCI mode.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host
Controller Interface (AHCI) is an interface specification that allows the
storage driver to enable advanced Serial ATA features such as Native
Command Queuing and hot plug. (Default)
RAID Enables RAID for the SATA controller.
»
M.2 Port
The category identifies M.2 types of hard disk that are installed in the
computer. System will automatically detect HDD type.
Note that the specifications of your drive must match with the drive
table. The hard disk will not work properly if you enter improper
information
for this category.
Hard drive information should be labeled on the outside device casing.
Enter the appropriate option based on this information.