manualshive.com logo in svg

GIGAIPC QBiX-JMB-CFLA310HG-B1, Startup Manual, Page: 21 / 32

Share
Download
GIGAIPC QBiX-JMB-CFLA310HG-B1 Startup Manual Download Page 21

21

www.gigaipc.com

 GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

2.3   Hardware Monitor

Item

Description

System Fan 1

Fail Warning

Enabled :  Enables System FAN 1 Fail warning alert function

Disabled : Disables System FAN 1 Fail warning alert function (Default setting)

(This setting will effect only if you add the extend kit on the system)

System Fan 2

Fail Warning

Enabled :  Enables System FAN 2 Fail warning alert function

Disabled : Disables System FAN 2 Fail warning alert function (Default setting)

(This setting will effect only if you add the extend kit on the system)

System Fan 1 

Speed Control

Normal : Fan speed set by BIOS default (Default setting)

Full Speed : Set Fan operates at full speed 

(This setting will effect only if you add the extend kit on the system)

System Fan 2

Speed Control

Normal : Fan speed set by BIOS default (Default setting)

Full Speed : Set Fan operates at full speed

(This setting will effect only if you add the extend kit on the system)

CPU Temperature

Shows current CPU temperature

System Temperature 1

Shows current System temperature

System Temperature 2

Shows current System temperature for the extend kit of the system
(This numerical value will shows only if you add the extend kit on the system)

System Fan 1

Speed

Shows current System fan 1 Speed for the extend kit of the system
(This numerical value will shows only if you add the extend kit on the system)

System Fan 2

Speed

Shows current System fan 2 Speed for the extend kit of the system
(This numerical value will shows only if you add the extend kit on the system)

Summary of Contents for QBiX-JMB-CFLA310HG-B1

































Reviews:

No comments