Sys
tem - QBiX
-Je
tson Series
QBiX
-Je
tson-Xa
vierAHP
-A1/ NanoAHP
-A1
19
www.gigaipc.com
2.4
Recovery button
Following instructions will help you to re-program
NVIDIA® Jetson Nano module.
1. Please make sure to power off QBiX-Jetson Xavier/Nano
system.
2. Prepare a USB cable to connect between your host system
and QBiX-Jetson Xavier/Nano system.
For the host system : plug into any USB port
For QBiX-Jetson Xavier/Nano system : plug into USB Micro B 2.0
port
3. Power on QBiX-Jetson Xavier/Nano system, then press
Recovery button for 3 seconds, and back to the host system
clicks "flash" to start re-program process on QBiX-Jetson
Xavier/Nano system. After installation is complete, follow the
instructions to install BSP.
4. Back to QBiX-Jetson Xavier/Nano System, complete the
informations which the system requires you to fill-in.
5. After filling in all the information, the system will reboot
automatically, your re-program process is complete.
Summary of Contents for QBiX-Jetson-NanoAHP-A1
Page 10: ...10 www gigaipc com ...
