18
© Gigahertz Solutions GmbH
Made in Germany
its contents of the total signal. This “marking” has a frequency of
16 Hz, and is also available as audio sample on our website (see
“Sound Samples”).
Note concerning the switch setting “Pulse“:
Under special laboratory conditions a signal can be created, which causes an ad-
ditional deviation from the actual value of up to -3 dB. However, commercially
used modulations under field conditions will only show minimal deviations.
Use of Signal Outputs
AC output:
The AC output “PC/head-set”, 3.5 mm jack socket, is meant for an
in-depth analysis of the AM/pulsed content of the signal by headset
or a corresponding PC-audiocard.
DC output
(2.5 mm jack socket)
:
The DC output is meant for a long-term recording of the display
value. If “Full Scale” is displayed, it has 1 VDC output.
The auto power off function is automatically deactivated as soon
as external devices are connected, but only as long as there is no
threat of total discharge.
Further Analysis /
Optional Accessories:
Available from Gigahertz Solutions:
The amplifier HV10
for a particularly high resolution, allowing
measurements of very weak HF signals.
The Attenuator DG20_G10
allowing the measurement of very
strong HF signals.
A Frequency filter
for a more specific differentiation of the vari-
ous sources
Meters for HF from 2.4 to 6 or 10 GHz
allowing the analysis of
even higher frequencies, i.e. the HFW35C (2.4 - 6 GHz) or
HFW59D (2.4 - 10 GHz)
Meters for the low frequencies:
With the NFA series, which al-
lows a three-dimensional measurement of alternating electrical
and magnetic fields, Gigahertz Solutions offers a broad range of
professional measurement technology also for this frequency
range.
Data loggers:
All NFA meters can equally be applied as data log-
gers for long-term recordings.
