-8-
2.1.2. Rear Panel
Figure 2-2 Rear Panel
PRINTER
Parallel port connector (25-pins D-type female). This is where you will
connect the shared printer.
(
Optional
)
WAN
WAN port socket (RJ -45). This is where you will connect to your cable (or
DSL) modem or Ethernet router.
COM
Serial port connector (9-pins D-type male). This is where you will connect
your modem. This port is also a console port.
Power
Power inlet. This is where you connect the included power adapter.
Note
that, the included power adapter is DC 5V/1A. Using wrong type of power
adapter may cause this product damage
.
2.2 Installation Requirements
This product can be positioned at any convenient place in your office or house. No special
wiring or cooling requirements is needed. However, you should comply with the
following guidelines to install:
l
Place this product on a flat horizontal plane.
l
Keep this product away from any heating devices.
l
Do not place this product in dusty or wet environment.
The recommended operational specifications of this product are:
Temperature
0
o
C ~ 55
o
C
Humidity
5 % ~ 90 %
In addition, remember to turn off the power, remove the power cord from the outlet, and
keep your hands dry when you try to install the hardware of this product.
