PCMCIA Fast Ethernet card user’s manual
38
5.
Insert the Ethernet Card into the PCMCIA socket. Then
attach the network cable to the card.
6.
Restart your computer and connect to your network.
The Install program
Before you can use your Ethernet Card, you need to install and
modify some files in your computer system. You can make these
changes manually, or you can let the INSTALL.EXE program
make them for you.
This section explains how you can use the INSTALL.EXE program
to install the enablers and the files needed by the network operating
system.
Using the Install program
To run the INSTALL.EXE program, follow these instructions:
At the DOS prompt type “INSTALL” and press [Enter]. You see
an opening screen, which welcomes you to the program and asks if
you wish to continue.
PCMCIA 10/100Mbps Ethernet Card Installation Program
DO YOU WANT TO PROCEED?
Welcome to the PCMCIA 10/100Mbps Ethernet Card Installation Program.
INSTALL will set up your PCMCIA 10/100Mbps Ethernet Card.
If your network operating system is installed, insert your PCMCIA 10/100
Ethernet Card in any available PCMCIA slot on your computer and press
<Enter> to continue.
Otherwise press <F3> to return to DOS.
<Enter> to continue <F3> to return to DOS
Press [Enter] to continue the installation.
Summary of Contents for EE101-AEX
Page 2: ......
Page 6: ......
Page 20: ...PCMCIA Fast Ethernet card user s manual 14 N NO OT TE ES S ...
Page 59: ...PCMCIA Fast Ethernet card user s manual 53 N NO OT TE ES S ...
