User Guide
GD32L233C-START
6/16
3.
Getting started
The EVAL board uses GD-Link Mini USB connecter to get power DC +5V, which is the
hardware system normal work voltage. A GD-Link on board is necessary in order to download
and debug programs. Select the correct boot mode and then power on, the LEDPWR will turn
on, which indicates the power supply is OK.
There are Keil version and IAR version of all projects. Keil version of the projects are created
based on Keil MDK-ARM 5.26 uVision5. IAR version of the projects are created based on IAR
Embedded Workbench for ARM 8.32.1. During use, the following points should be noted:
1. If you use Keil uVision5 to open the project. In order to solve the "Device Missing (s)"
problem, you can install GigaDevice.GD32L23x_DFP_1.0.0.
2. If you use IAR to open the project, install IAR_GD32L23x_ADDON_1.0.0.exe to load the
associated files.
