Gigabyte TRX40 DESIGNARE User Manual Download

Page: 10 / 112

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

AMD Socket sTRX4:

- Support 3rd Generation AMD Ryzen

™

Threadripper

™

processors

(Go to GIGABYTE's website for the latest CPU support list.)

Chipset

AMD TRX40

Memory

8 x DDR4 DIMM sockets supporting up to 256 GB (32 GB single DIMM capacity)

of system memory

Quad channel memory architecture

Support for DDR4 3200/2933/2667/2400/2133 MHz memory modules

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Profile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Audio

Realtek

ALC4050H codec+Realtek

ALC1220-VB codec

Support for DTS:X

Ultra

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

2 x Intel

GbE LAN chips (10/100/1000 Mbit)

Wireless

Communication

Module

Intel

Wi-Fi 6 AX200

- Wi-Fi 802.11a/b/g/n/ac/ax, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 5.0

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

* Actual data rate may vary depending on environment and equipment.

Expansion Slots

2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)

2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)

1 x PCI Express x1 slot

(All of the PCI Express slots conform to PCI Express 4.0 standard.)

Multi-Graphics

Technology

Support for AMD Quad-GPU CrossFire

™

and 4-Way/3-Way/2-Way AMD

CrossFire

™

technologies

Support for NVIDIA

Quad-GPU SLI

™

and 4-Way/3-Way/2-Way NVIDIA

SLI

™

technologies

Storage Interface

CPU:

- 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe

4.0 x4/x2 SSD support) (M2M)

- 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2

SSD support) (M2Q)

Chipset:

- 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe 4.0

x4/x2 SSD support) (M2P)

- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)

(M2C)

- 8 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, and RAID 10

Summary of Contents for TRX40 DESIGNARE

















































































































Search results

Summary of Contents for TRX40 DESIGNARE

Reviews:

Related manuals for TRX40 DESIGNARE

Brands by name

Popular brands

Gigabyte TRX40 DESIGNARE, User Manual

Search results

Summary of Contents for TRX40 DESIGNARE

Reviews:

Related manuals for TRX40 DESIGNARE

Brands by name

Popular brands