Gigabyte S452-Z30, User Manual

Page: 85 / 116

- 85 - BIOS Setup
Parameter Description
Link
Press [Enter] for more options.
Š
GMI encryption control
– Control GMI link encryption.
– Options available: Disable/Enable/Auto. Default option is Auto .
Š
xGMI encryption control
– Control xGMI link encryption.Options available: Disable/Enable/
Auto. Default option is Auto .
Š
CAKE CRC perf bounds control
– Control CAKE CRC perf bounds
– Options available: Auto/Manual. Default option is Auto .
Š
4-link xGMI max speed
– Set 4-link xGMI max speed.
– Options available: 10.667Gbps/13Gbps/16Gbps/18Gbps/Auto.
Default option is Auto .
Š
3-link xGMI max speed
– Set 3-link xGMI max speed.
– Options available: 10.667Gbps/13Gbps/16Gbps/18Gbps/Auto.
Default option is Auto .
Š
xGMI TXEQ Mode
– Select XGMI TXEQ/RX vetting Mode.
– Options available: TXEQ_Disabled/TXEQ_LAne/TXEQ_Link/
TXEQ_RX_Vet/Auto. Default option is Auto .
Disable DF to external IP
Sync Flood Propagation
Disable SyncFlood to UMC & downstream slaves.
Options avaialble: Sync flood disabled/Sync flood enabled/Auto.
Default option is Auto .
Disable DF sync flood
propagation
Enable/Disable DF SyncFlood.
Options avaialble: Sync flood disabled/Sync flood enabled/Auto.
Default option is Auto .
Freeze DF module queues on
error Controls DF PIE Config. Disabling this options sets DF:PIEConfig.
Options available: Disable/Enable/Auto. Default option is Auto .
CC6 memory region encryption
Control whether or not the CC6 save/restore memory is encrypted.
Options available: Disable/Enable/Auto. Default option is
Auto .
System probe filter
Controls whether or not the probe filter is enabled. Has no effect on parts
where the probe filter is fuse disabled.
Options available: Disable/Enable/Auto. Default option is Auto .
Memory Clear
When this feature is disabled, BIOS does not implement MemClear after
memory training (only if non-ECC DIMMs are used).
Options available: Disable/Enable/Auto. Default option is
Auto .
PSP error injection support
Select True to enable error injection.
Options available: False/True. Default option is False .