Gigabyte R282-Z97, User Manual

Page: 13 / 152

- 13 -
Hardware Installation
Soc
ket
Socket
Sec
uri
ty
Security Server Operating Properties
Power Supply
Storage
Front side:
Š
Default setting: 12 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Š
Upgradable for 24 x 2.5" Gen4 NVMe hot-swappable SSD bays
Rear side:
Š
2 x 2.5" SATA hot-swappable HDD/SSD bays, from onboard SATA signals
SAS card is required for SAS devices support
1 x M.2 slot:
Š
M-key
Š
PCIe Gen4 x4
Š
Supports NGFF-2242/2260/2280/22110 cards
Š
CPU TDP is limited to 225W if using M.2 device
Soc
ket
Socket
Sec
uri
ty
Security Server Operating Properties
Power Supply
SAS
SASDepends on SAS card
Soc
ket
Socket
Sec
uri
ty
Security Server Operating Properties
Power Supply
RAID
Depends on SAS card
Soc
ket
Socket
Sec
uri
ty
Security Server Operating Properties
Power Supply
Expansion Slot
Riser Card CRS2027:
Š
2 x PCIe x8 slot (Gen4 x8), Low profile half-length, available for Tri-Mode
NVMe Storage Adapters
Riser Card CRS2033:
Š
1 x PCIe x16 slot (Gen4 x16), FHHL
Š
1 x PCIe x8 slot (Gen4 x8), FHHL, available for Tri-Mode NVMe Storage
Adapters
Š
1 x PCIe x8 slot (Gen4 x8), FHHL, available for Tri-Mode NVMe Storage
Adapters
Riser Card CRS2033:
Š
1 x PCIe x16 slot (Gen4 x16), FHHL
Š
1 x PCIe x8 slot (Gen4 x8), FHHL, available for Tri-Mode NVMe Storage
Adapters
Š
1 x PCIe x8 slot (Gen4 x8), FHHL, available for Tri-Mode NVMe Storage
Adapters
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
Supported NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth (Type1, P1, P2)
Supported NCSI function