- 99 -
BIOS Setup
Parameter
Description
eMMC Options
Press [Enter] for more options.
eMMC/SD Configure
– Options available: Disabled/SD Normal Speed/SD High Speed/SD
UHSI-SDR50/SD UHSI-DDR50/SDUHSI-SDR104/eMMC Emmc
Backward Compatibility/eMMC High Speed SDR/eMMC High
Speed DDR/eMMC HS200/eMMCHS400/eMMC HS300/Auto.
Default setting is
Auto
.
Driver Type
– BIOS will select MS driver for SD selections.
– Options available: AMD eMMC Driver/MS Driver/Auto. Default
setting is
Auto
.
D3 Cold Support
– Options available: Disabled/Enabled/Auto. Default setting is
Auto
.
eMMC Boot
– Options available: Disabled/Enabled/Auto. Default setting is
Auto
.
FCH RAS Options
Press [Enter] for more options.
ALink RAS Support
– Options available: Disabled/Enabled/Auto. Default setting is
Auto
.
Reset after sync flood
–
Enable AB to forward downstream sync-flood message to system
controller.
– Options available: Disabled/Enabled/Auto. Default setting is
Auto
.
Summary of Contents for R282-Z93
