- 11 -
Hardware Installation
Storage
Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 2 x 2.5" SATA only hot-swappable HDD/SSD bays
Onboard Broadcom® SAS3008 controller
Onboard Broadcom® SAS35x36R expander
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
- NOTE: GIGABYTE recommends that you follow the QVL when selecting hard
drives, to avoid any system compatibility issues
SAS
Supported
Internal
Connectors
2 x Power supply connectors
2 x SlimSAS connectors
2 x SATA 7-pin connectors
1 x USB 3.0 header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS switch
1 x BIOS recovery switch
Front Panel
LED/Buttons
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
Rear Panel I/O
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x SFP+
1 x MLAN
1 x ID button with LED
Backplane I/O
Front side_CBP20O2: 24 x SATA/SAS ports
Rear side_CBP2020: 2 x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Summary of Contents for R281-T91
