Gigabyte R280-A3C Service Manual Download Page 108

Page: 108 / 121

- 108 -

BIOS Setup

There are two types of passwords that you can set:

•

Administrator Password

Entering this password will allow the user to access and change all settings in the Setup Utility.

•

User Password

Entering this password will restrict a user’s access to the Setup menus. To enable or disable

this field, a Administrator Password must first be set. A user can only access and modify the

System Time, System Date, and Set User Password fields.

Administrator Password

Press Enter to configure the Administrator password.

User Password

Press Enter to configure the user password.

Secure Boot menu

Press [Enter] for configuration of advanced items.

5-5 Security Menu

The Security menu allows you to safeguard and protect the system from unauthorized use by setting up
access passwords.

Summary of Contents for R280-A3C


























































































































Search results

Summary of Contents for R280-A3C

Reviews:

Related manuals for R280-A3C

Brands by name

Popular brands

Gigabyte R280-A3C, Service Manual

Search results

Summary of Contents for R280-A3C

Reviews:

Related manuals for R280-A3C

Brands by name

Popular brands